Events

  • Tue
    07
    Jun
    2016
    Thu
    09
    Jun
    2016
  • Wed
    08
    Jun
    2016
    Fri
    10
    Jun
    2016
  • Sat
    25
    Jun
    2016
    Mon
    27
    Jun
    2016
    TWTC Nangang Exhibition Hall - Nangang, Taiwan
  • Mon
    12
    Sep
    2016
    Sat
    17
    Sep
    2016
  • Tue
    27
    Sep
    2016
    Thu
    29
    Sep
    2016
  • Wed
    16
    Nov
    2016
    Santa Clara, CA

    This is a no cost 1-day workshop.

    REGISTER HERE

    Learn what is possible with the latest non-contact measurement technologies. Experience a range of state-of-the-art instruments and software from top manufacturers.

    Dr. Erik Novak will be presenting "Polarized Light Portable Surface Profiling (1um)", 2:30 PM.

  • Mon
    28
    Nov
    2016
    Thu
    01
    Dec
    2016
  • Thu
    19
    Jan
    2017
    11:00 amTucson, AZ

    Register here for the webinar.

    Precision components for aerospace, automotive, and other applications must be inspected throughout production for damage, and throughout their life span for wear, corrosion and defects.

    4d InSpec Surface Gauge Measuring Aircraft Engine Casing

    4d InSpec Surface Gauge Measuring Aircraft Engine Casing

    Inspectors face challenges in determining the severity of defects and the depth of desired features such as laser marking or dot peening. Visual comparison techniques are quick and inexpensive but are subjective and not repeatable. More accurate metrology systems are typically too expensive, slow and susceptible to environmental factors for use on the shop floor.

    The 4D InSpec Surface Gauge is the first handheld, precision instrument for non-contact measurement of surface features and defects, with micrometer-level resolution. The gauge measures defects from 0.1 to 100 mils deep, even in difficult-to-access areas such as under flanges, in bores and on curved surfaces. Measurements take just seconds, with instant results and reporting.

    In this webinar we will discuss the Polarized Structured Light (PSL) technology behind the 4D InSpec Surface Gauge. We will demonstrate how the 4D InSpec can be used to measure surface features on large components and in difficult to access areas, as well as to make repeatable QA/QC measurements on production parts.

    The webinar will take place Thursday, Jan 19, 2017 1:00PM - 2:00PM EST (18:00 GMT).

    Register here for the webinar.

  • Tue
    31
    Jan
    2017
    Thu
    02
    Feb
    2017
  • Mon
    27
    Mar
    2017
    Thu
    30
    Mar
    2017
    New Orleans, LA

    http://nacecorrosion.org/

  • Tue
    04
    Apr
    2017
    Thu
    06
    Apr
    2017
    Detroit, MI

    http://www.sae.org/congress/

  • Tue
    16
    May
    2017
    Thu
    18
    May
    2017
    West Hartford, MA, United States

    http://www.easteconline.com/

  • Mon
    26
    Jun
    2017
    Thu
    29
    Jun
    2017
    Munich, Germany

    http://www.world-of-photonics.com/

    Arizona Commerce Authority Booth B2.135/3.
    Soliton Booth, Number B2.415.

  • Wed
    28
    Jun
    2017
    Fri
    30
    Jun
    2017
    Charlotte, NC, United States

    https://www.asme.org/events/turbo-expo

  • Tue
    18
    Jul
    2017
    5:00 pmOn Line Webinar

    4D Technology invites you to join us for a webinar discussing improved methods and technologies for high resolution, shop-floor surface defect measurement. The webinar will take place on Tuesday, July 18, 12:00pm EST (16:00 GMT).

    Register for the webinar here.

    Accurate measurement of surface defects is essential to the long life and performance of precision components for aerospace, automotive, and other applications. 

    The challenge facing inspectors is how to quantify pits, scratches, bumps, etc., with sufficient resolution, coverage and speed to satisfy customer requirements—particularly on complex surfaces or on large components. 

    In this webinar we will discuss the challenges involved in making accurate surface defect measurements. Kevin Harding, President of Optical Metrology Solutions, (recently retired as GE Research Principal Scientist), will discuss the strengths and shortcomings of common measurement techniques, ranging from a “calibrated fingernail” to high-end 3D surface profilers.

    Dr. Erik Novak of 4D Technology Corporation will present the 4D InSpec Surface Gauge, the first handheld, precision instrument for non-contact, 3D measurement of surface features and defects. Developed in conjunction with major aerospace and precision machining companies, the handheld 4D InSpec measures defects from 0.1 to 100 mils deep, even in difficult part locations, with measurement times of a few seconds and instant results and reporting. 

    Examples from new-make and repair/rework facilities will be presented in which the new gauge has been used to dramatically reduce measurement cycle time, decrease the rate of rework due to false-positive measurements, and improve the traceability and reliability of measurement results. 

    The webinar will take place Tuesday, July 18, 12:00 PM - 1:00 PM Eastern Standard Time (16:00 GMT). A recording of the webinar will be made available to all registrants shortly after the event.

    Register for the webinar here.

  • Tue
    08
    Aug
    2017
    Thu
    10
    Aug
    2017
    San Diego, CA

    https://spie.org/conferences-and-exhibitions/optics-and-photonics

  • Tue
    24
    Oct
    2017
    Thu
    26
    Oct
    2017
    Chicago, IL

    http://www.qualityshow.com/

  • Wed
    08
    Nov
    2017
    Santa Clara, CA

    https://www.regonline.com/builder/site/Default.aspx?EventID=2039342

  • Tue
    14
    Nov
    2017
    Wed
    15
    Nov
    2017
    Coventry, United Kingdom

    http://www.epmc.events/

  • Mon
    04
    Dec
    2017
    Thu
    07
    Dec
    2017
    Tampa, FL

    www.dmcmeeting.com/

    Dr. Erik Novak will present, "Handheld NonContact 3D Inspection of Precision Components Improves Yields", Tuesday, December 5.

  • Thu
    11
    Jan
    2018
    Fri
    12
    Jan
    2018
    1:00 EST (1800 GMT)

    Do you need to dramatically reduce scrap and rework of precision machined parts? We can help. Attend 4D Technology's "Simple, 3D Shop Floor Measurement Reduces Part Rejection" webinar on Thursday, January 11, 1:00 pm EST (18:00 GMT) to learn about new methods for affordable, high resolution, shop-floor surface defect and feature measurement.

  • Wed
    31
    Jan
    2018
    Fri
    02
    Feb
    2018
    San Francisco, CA, United States

    https://spie.org/conferences-and-exhibitions/photonics-west?SSO=1

  • Mon
    19
    Feb
    2018
    Tue
    20
    Feb
    2018
    Bellevue (Seattle), Washington, United States

    http://amconshows.com/spring-shows/bellevue-wa-manufacturing-show/

  • Tue
    27
    Mar
    2018
    Wed
    28
    Mar
    2018
    Long Beach, CA, United States

    http://aerodefevent.com/

  • Mon
    09
    Apr
    2018
    Fri
    13
    Apr
    2018
    Stand No. H18-341 in the Inspection Zone

    http://www.machexhibition.com

  • Tue
    10
    Apr
    2018
    Thu
    12
    Apr
    2018
    Detroit, MI, United States

    http://wcx18.org/

  • Tue
    10
    Apr
    2018
    Thu
    12
    Apr
    2018
    Orlando, FL, United States

    http://mroamericas.aviationweek.com/am18/Public/Enter.aspx

  • Mon
    16
    Apr
    2018
    Thu
    19
    Apr
    2018
    Phoenix, AZ

    http://nacecorrosion.org/

  • Tue
    24
    Apr
    2018
    Fri
    27
    Apr
    2018
    Stuttgart, Germany

    http://www.control-messe.de/en/

  • Mon
    14
    May
    2018
    Wed
    16
    May
    2018
    Shanghai, China

    http://www.airexpochina.com/web/en/

  • Tue
    26
    Jun
    2018
    Sat
    30
    Jun
    2018
  • Mon
    10
    Sep
    2018
    Sat
    15
    Sep
    2018
    Chicago, IL, United States

    Booth 122007
    East Building Level 2
    https://www.imts.com/

  • Fri
    23
    Nov
    2018
    Sat
    24
    Nov
    2018

    4D Technology will be closed on the US Thanksgiving holidays. We wish you and yours a pleasant holiday.

  • Tue
    25
    Dec
    2018

    4D Technology will be closed Christmas day. We wish you Happy Holidays, and a prosperous New Year.

  • Tue
    09
    Apr
    2019
    Thu
    11
    Apr
    2019
    Atlanta, Georgia, USA

    Join us at the show!

    4D Technology Corporation

    Booth: 3552

    MRO Americas provides a world class venue for all those involved in the MRO sector to exchange ideas and best practices, share experiences, debate issues and challenges and gather knowledge.

    April 9-11, 2019
    Georgia World Congress Center
    Atlanta, Georgia, USA

    Company Description

    4D Technology designs and manufactures surface gauges, surface roughness profilers and other metrology for accurate measurement of precision surfaces. The 4D InSpec Surface Gauge is the first handheld, precision instrument for non-contact, 3D measurement of surface features and defects. The 4D InSpec brings high resolution, 3D surface measurement to the factory floor. Measure pits, scratches, nicks, dents, bumps, rivet depth, dot peen depth, etc., from 0.0002” to 0.1” (5 µm–2.5 mm) deep or tall. The 4D InSpec is far more repeatable and accurate than visual comparison and more flexible and affordable than high-end measurement systems.

  • Wed
    10
    Apr
    2019
    1:00 EST (UTC-7)Online live stream

    What if you could reduce turnaround time and part shortages by taking better, easier measurements?
    This exclusive webinar demonstrates how to get more parts from your parts inspection process with 3D shop floor measurements. You’ll learn how to beat the most difficult metrology challenges and qualify more parts:

    • Blade edges
    • Hard-to-reach corners
    • Insides and outsides of cylinders
    • Components, prior to disassembly

    Coming soon! April 10, 2019, 1:00PM EST (UTC-7)

    Register here!

  • Tue
    30
    Apr
    2019
    Thu
    02
    May
    2019
    Long Beach, California

    Join us in Long Beach! Booth 1423
    Featuring live demonstrations of 3D defect inspection and feature measurement on parts using 4D InSpec. Try it yourself in this hands-on, interactive opportunity.
    Take a look at the map of the show floor to help you find our booth.

  • Tue
    07
    May
    2019
    Fri
    10
    May
    2019
    Stuttgart, Germany

    Soliton Laser- und Messtechnik GmbH, our newest distributor for 4D InSpec in Germany and related countries of mainland Europe will be demonstrating 4D InSpec in their booth at the 2019 Control Quality Assurance event. Map it: Exhibition Hall 7 - Booth 7507

    Contact for Soliton:

    Talhofstr. 32
    82205 Gilching
    Germany

    +49 8105 7792-0
    info@soliton-gmbh.de
    www.soliton-gmbh.de

  • Tue
    14
    May
    2019
    Thu
    16
    May
    2019
    West Springfield MA

    Join us for live demonstrations of 3D defect inspection on parts using 4D InSpec.
    Also demonstrating the new, award winning 4D InSpec XL.
    See the live robotic inspection demonstration!

    Booth 3211

  • Tue
    18
    Jun
    2019
    Thu
    20
    Jun
    2019
    Phoenix, Arizona

    Join us at ASME's Turbo Expo -- a show about turbine engines and increasing engine power-- and see parts measured live on the show floor.

    Where: Phoenix, Arizona USA
    When: June 18-20, 2019
    Booth: 336
    Displaying: 4D InSpec handheld defect gauge

    We hope to see you there!

  • Tue
    22
    Oct
    2019
    Thu
    24
    Oct
    2019
    Rosemont, IL

    Join us in Chicagoland at the biennial Quality show!
    See live demonstrations of 4D InSpec, and try your hand at how easy it is.
    We'll be showcasing the new aluminum housing, which is quieter, stronger, with better resolution.

    If room permits, we'll show the new robotic automation features as well.

    Donald E. Stephens Convention Center
    Rosemont, Illinois
    Booth 1611
    See the floor plan

News

VIEW ALL -
TOP